THey are awsome arent they [boot time 20sec not counting login ]
greg2
What will happen if dosn't use the jumper[it comes one]some boards will not pick it up even it is plugged in
NO its not master or slave it is to set the transfer rate to 1.5 0R 3.0 depending on the drive some are SATA 1 some ARE SATA 2 i went through it but he gets a WD there 1-800 num is very helpful they will walk you right through it
i have the intel 865 GBF it easy you just have to go into the bios and pick drive to boot from SATA drive get you have to put a jumper in the drive [ to tell it SATA 1 or 2 ]that board is same mine SATA 1
Yes i agree i have a WD74gb raptor 10,000rpm and speed difference is very noticable [seek 4 milli sec opposed to 8 or higher with most drives IDE or SATA]
yes but the converters defeat the purpose of adding a SATA to your system [they cut the data transfer rate of 1.5 GB to 133mb or less]That is why SATA drives are faster they transfer more info per sec than IDE.If you have a bundled comp.[e-machine, HP,Compaq]normally you cant use a SATA, but most custom box's or INTEL boards will take a SATA drive Hope that clears it up and helps you Tycus.And yes you can use both
isn't that the truth Snowman Thanks for ckecking the thred snowman
yea its under settings on IP
dont awfull buggy right now bicher
Are using HSL coloring or Forced coloring Tycus?
WindowBlinds 5.0 System Information Report: STATUS : WB+ SRV+ HLP+ UI+ TRAY+ WindowBlinds is installed correctly on this PC. WindowBlinds appears to be activated on this PC Your machine supports per pixel borders on WindowBlinds skins. You have one monitor in total. (Plug and Play Monitor) 1 is attached to RADEON 9800 PRO Wblind.dll 2006/08/09 18:09:02 Wbsrv.dll 2006/08/09 18:14:26 Wbconfig.exe 2006/07/13 18:3
Same problem here Bicher only mines oppisite when i open FF window frame is winows classic min/max it win/frame appears normal?Min. to taskbar and then bring it back and Win/frame just diappears no buttons nothing have to close it from the taskbar and yes same build as you
Thanx Jafo i will The Deep again too Your the best
Sorry i think i may have found the problem when you hit browse next to preview it saves it as all files[''] instaed of JPG unless you select JPG SO i sent the right preview of each thanks Jafo
yes screenshots jafo and when originally submitted both posts [The deep and Nalu My Mermaid ]and they were both uploaded as full screen shots 1280 by 1024 JPG's and i was told they were too small?My 1st upload My Blue Vista which is in screenshots now WAS UPLOADED THE EXACT SAME WAY sorry about the caps but having trouble understanding why my upload was fine the 1st time [My Blue Vista]but my 2nd and 3rd upload [The Deep 2nd and Nalu My Mermaid 3rd]Which uploaded the same way were not big enough
Snowman on the 13th i uploaded a screen shot My blue vista i made the images in micro. photo editer one was 1280-1024 and one was 150-120 and i pulled the thumbnails from my pictures.About an hour later i got an confirmation e-mail it was accepted and would be posted Now my last 2 uploads [The Deep and Nalu My Mermaid]And both images were uploaded the same way as My Blue Vista and now i told the images are to small?And now when i try to upload a full image of each from Image Shack [direct link p
Yea now that i think of you are right Zubaz when ever i change color of a skin it reverts to the last setting it was at
Yea i understand i figured you knew how to adjust and i agree it would be a nice feature if saved colors but know no file ajust to do it You might try hunting down Neil Bienfield he is the developer he might be able to steer you in a better direction than me
what files did you alter?And does this happen with all skins or just that one [not being able to change icons]And what version IE are you using?
try adjusting just the gamma not the sauturation thats only one slider to remember plus it is very sensitive depending on vidio your card so you should only have to move it a little bit
The only other thing i can think of is if you are using the trial version you cant changs the toolbar icons and you cant use any WB5 skins until you pay for it
Yes thats the one and no you don't have to reboot it will just reapply the skin using those toolbar icons Enjoy
That skin only has a few icons not enough for the full toolbar Just go into WB config./toolbars and select your favorite toolbar [arrow from Mike Bryant looks good with that skin]Then select always use this toolbar and apply I have Nuvom i had the same prob. so thats what i do
thanks guys the print/worked
i am using image shack quikstart