COGger

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

I'll turn off all the power down portions to see what happens and look forward to the next Multiplicity update

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

Sorry for the delay. Laptop #1 (Which never turns off) multiplicity will work after a hard reboot upon the initial log in screen, but goes back to the behavior of not working if you let the machine idle for more than 30 minutes Laptop #2 (Which is on from 0800-1700) never has Multiplicity work without a log in even after a hard reboot and waiting up to 5 minutes before logging in. And this behavior continues the moment you lock the screen as well

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

For reference Dell just released a BIOS update and some driver updates for laptop #1. After the application of said updates and a reboot. Multiplicity did load without opening the screen. I'll do some more testing tonight/tomorrow to check how everything behaves.

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

When I test either laptop when Multiplicity is not reacting to moving the mouse to either laptop the test fails. Obviously the test works once I log in. :) If Multiplicity is working and I lock the screen(s) Multiplicity continues to work. Oddly with laptop #1 (Which is set to never shut down the computer; only the display) Multiplicity seems to "unload" itself after some time after 45 minutes (Screen turns off @ 30 min) and I have to log back in. Then it all works fine.

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

It does. What should I change? Laptop #1: powercfg -a The following sleep states are available on this system: Standby (S0 Low Power Idle) Network Connected Hibernate Fast Startup The following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby st

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

Both laptops do have external displays and I do need to raise the lid. I need access to the keyboard and the internal display as thhe external one doesn't turn on until after I raise the lid. Raising the lid is not enough for Multiplicty to kick in and allow me to use the Primary's keyboard and mouse

Reply to Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

Primary Computer Windows OS: Windows 11 Pro, Version 24H2, Build 26100.2894 Multiplicity: Version 4 Pro (No updates available) Laptop #1 Windows OS: Windows 11 Pro, Version 24H2, Build 26100.2894 Multiplicity: Version 4 Pro (No updates available) Laptop #2 Windows OS: Windows 11 Enterprise, 24H2, OS build 26100.2894 Multiplicity: Version 4 Pro (No updates available) The two laptops sit on a d

Secondary machines only work AFTER you log in in Multiplicity Stardock Forums

I have updated to the latest Multiplicity as well as the latest Windows 11 update. I'm seeing some odd behavior that I never saw under v3. When my laptops which have Multiplicity installed as a secondary I can only use those laptops in seamless mode AFTER I log into them. Before I could move the mouse and log in without issue, but now I have to log in with an attached keyboard and mouse and THEN everything works as expected. Has anyone else seen this? Any ideas why I'm seeing