WinCustomize Forums
I was able to reproduce this once and then it stopped which made tracking it down difficult. I plan to revisit it next week.
What does the system information page say?
If that happens then it sounds like you have an app running which is trying to make all menus transparent. You will need to disable that with WB skins which use per pixel menus as they will break the menus.
If explorer is still crashing when you have unloaded WB then its not WB at fault. If you have SDMCP running please remove it and see if it helps. Please install Smart Exception because we need a crash stack.
WinCustomize Forums
I have been unable to reproduce this here. The MSVDM works correctly and changes wallpapers when expected. I would check that you don't have active desktop enabled by mistake as that can sometimes cause wallpaper problems.
Reproduced. I will look into why this is happening.
Dave711: its not trayserver you should be looking for, its a .CMD file.
The shareware version of WB5 will only enable per pixel on the 4 per pixel skins included. Any other per pixel skin will act just like it does on machines which do not support per pixel borders. So if you downloaded the arrow skin, it will work, but without per pixel borders.
Are you finding firefox is showing up with no titlebar?
jsawiuk: I would guess the server is still processing upgrades. Unsure why it is taking quite that long. I will get the status of the e-mail sending checked & post here to let you know.
Izzee: a 9800 does support per pixel. You can see if your drivers are ok by going to the system information page in wbconfig. Try the aura skin and you should see per pixel alpha running just fine on your PC (without nagging you about it as its an included skin)
You should be able to install on all 3 computers. If you have a problem & hit an activation limit at any time, you can e-mail [email protected] who should be able to reset it for you. Each sig.bin is per machine though, so you cannot take the sig.bin from one PC and use it on another.
Out of interest, if you reboot & then do ctrl-alt-del on the secondary keyboard, can you then use multiplicity to enter into the username & password box? After you have done that, you should be able to fix it by following the instructions below. It seems you have a security setting enabled. Run gpedit.msc. Go to local computer policy->computer configuration->windows settings->security settings->local policies->security option. Then
Which skins do this?
Lotherius: an interesting question. I will check for you what happens.
Please install SmartException (free part of SDC) and see if it catches any info on the crash. If you set WB to use no skin (classic), does the problem still happen?
Look for a .cmd file autorunning on your PC - use msconfig. Thats why sig.bin is locked.
Which beta build were you using?
You should not need to activate WB on different accounts assuming WB is installed in the same directory for all users (I.e you just installed WB once on the PC and then just run wbconfig on the other users) If you still have activation issues, please e-mail [email protected]
Sorry, could you post dates & sizes of just the files please.
Please post a directory listing of your WindowBlinds directory
Shell menu?
Wbconfig fails to run? Please post a directory listing of your WindowBlinds directory.
Fauhler: that is the correct install directory on 64 bit.
Denon36 is waiting for the free update mail.
Stardock Forums