ok... first, the drive is the original factory drive and there were no installation discs. All the install/restoration files are on a separate partition on the hard drive which I can only access through a system restore program outside of WinXP. yrag...I don't have an nVidia motherboard. This is an hp Pavilion with a P4B-LA board. I can't find anything under IDE controllers referring to the DVD drive in device manager. Under IDE controllers I have entries for Intel Bus Master IDE Contro
Shameless Designs
I recently had to do a complete system restore on my rig because of some worms let loose by my kids. Long story, but I completely wiped the harddrive, reformatted, and reinstalled WinXP Home along with all the original software, then updated everything through MS security update CD and MS Windows update. Then I installed Norton System Works along with all the updates for that, including AV definitions. Ran all checks, everything seemed fine. I also installed, updated and ran Spybot S&D 1.3 and A
If you don't use skin studio, you could edit the .uis file in notepad, if it's a .uis2 skin. Just add the wallpaper file (e.g. mywall.bmp) to the skin folder, then open the .uis file in notepad. At the end of the [Personality] section, add a new line Wallpaper=mywall.bmp Save the file and reload the skin.
It's important to remember to not just delete the wallpaper from the skins theme folder, but to replace it as ChasUGC mentioned. If you just delete it without modifying the .uis file, you'll more than likely get an error from WB, and if I recall correctly, it will then be considered a broken skin by WB afterward.
Silver_Bird, we haven't met, but I am a fan of your work, as well as that of A67. I have been following this post off and on, and wanted to say that I'm glad to hear you are on the mend. I'll be keeping good thoughts for your continued improvement.
Thank you all for the kind sentiments. And latin, I sincerely hope for your sake that the next version of WC has a spell check feature.
I agree with IP, MikeB and kona. It shouldn't be merged. They've raised what I think are valid objections. In addition, I don't see an advantage to merging the two. You said that it will bring more focus to WinFX, but I submit it would divert focus from furthering either app in the short term as they focus on combining the two. Even if you were correct in the long term, where is the gain? It unnecessarily complicates skinning WB, which is already a fairly hefty undertaking. By the same
Posted as a matter of pride, an interest in debunking myths, and in defense of my fellow Americans, Styl. Feel free to ignore it if you wish.
#76 by Admin Jafo - 5/10/2004 8:11:07 AM DesignCaddy....it was never particularly 'clever' to allow a type-setter's error to determine how a language should 'evolve'....call it a horse and cart issue....or the tail wagging the dog. Jafo, it is also not particularly clever to perpetuate an urban legend which has no real basis in fact. The follow
I agree with everyone here that Object Desktop is definitely the best buy, and worth way more than the cost of a subscription. But to answer your specific question, this is from the WindowBlinds FAQ at Stardock.com: What versions is my license valid for? If you bought WindowBlinds on it's own you will be eligible for all updates until the next major version change. For example, if you bought WindowBlinds 3.0, you would be able to get WindowBlinds 3.3 now, and 3.4 in the
I feel like a kid again at the moment. I have been waiting for, it felt like forever, to get my WC subscription. I had planned to get one right after Christmas, but my girlfriend asked me to hold off because her two kids wanted to earn the money for it themselves and give it to me for my birthday. So finally, I got my subscription today. <img src="http://images.stardock.com/images/smiles/hot.gif" borde
#1 by Lady Snowman - 5/14/2004 4:14:46 PM Sure, why not?He was most likely just a normal person like the rest of us(if he ever existed that is) I really don''t think there is much doubt that Jesus of Nazareth, the man, existed. There is too much historical evidence from too many varied sources to confirm that he did, in fact, exist. Whether one
I'm not aware of any program that will do this, but if someone could create one, I think they would have one heck of a hot product on their hands. The coding for the two programs is so different that I can't begin to imagine the nightmare of making a skin converter for them.
The screenshot is from Pixel Pirate's Ascension WB entry at the GUIO's. He did not include the wallpaper in the skin, and it has not been posted here by Pixel Pirate. I don't recognize the wall myself, and can't see enough of it in the screenshot to even make a very good guess at the origin. You've said that you emailed him, and I can see that you have left several requests for it at the GUIO's, so hopefully, he will respond to you soon. But I have to say that I agree with most o
ispidermonkey21, There is really no need to start another thread with essentially the same content as the post you made in another thread 5 minutes before. Yes, it will get attention, but not really the kind of attention you desire. It's considered impolite, as the extra threads push other threads further down the list.
If he is getting the error message, "There appears to be no .uis file in this skin. Are you sure it is a WindowBlinds skin?" then he has to be using WindowBlinds to apply the skin. Only with windowBlinds installed would you get that particular error message. WILDA PARKER, what skin are you trying to open? Is this happening with just one skin or with several? Does the file have a .wba file extension or a .zip extension? If it is a zip, have you tried unzipping it to a folder to be sure t
I forwarded the email I received to Security @ yahoo for them to trace, though I don't really expect to ever hear from them again. That would be my idea of one of the ultimate thankless jobs. All they ever get are complaints and rarely if ever any recognition or gratitude.
You''re welcome, and I hope it works too. By the way, those power settings I referred to will override your screensaver and turn the monitor off, put the computer in standby or hibernate status. By default, many systems are set to turn the monitor off after 20 minutes of idle time, and the Welcome screen on resume is also a default setting. [Message Edited]
Hi guys, I received an e-mail apparently from webgizmos, with whom I have never before corresponded, and caught some similar information in the header. Thought I would post it here in case you are interested. X-Apparently-To: shamelessdesigns @yahoo.com via 216.136.232.73 Sun, 09 May 2004 01:40:12 -0700 Return-Path: webgizmos @msn.com Received: from 80.55.235.222 (HELO hcstudio.net) (80.55.235.222) by mta115.mail.scd.yahoo.com with SMTP Sun, 09 May 2004 01:39:56 -0700 Dat
how do i get to this on resume thingy? Right click on the desktop and choose Properties from the menu. This will bring up the Display Properties Dialogue. Click on the Screensaver tab. If your screensaver is set to (None), then you need to check the power settings by clicking the Power button at the bottom of the dialog
SNK, Sorry I haven't been around much lately. My girlfriend's 10-year old got some help from his buddies and figured out how to disable the firewall, anti-virus, and spy blockers so he could access this "really kewl site where they have all kinda free games." Our whole network was infected and I have been fighting to restore 6 hard drives on 4 machines. I know I have them all cleaned now, but I still have some software and data restoration to do. At any rate, I haven't download
#7 by Skinner CerebroJD - 5/11/2004 10:32:17 PM If he is a public user, not the administrator, it will display the welcome screen after the screensaver comes on, or monitor turns off, or whatever you have your computer set to do. That would be the case only if the administrator set things up so his level user could not change display propertie
#4 by Hus - 5/11/2004 10:16:45 PM All ya need to do is uncheck "On resume, display Welcome screen"That's on XP anyways... Hus, if he has his screensaver set to "(None)", which he says he does, then the "On resume, display Welcome Screen" option is disabled. <img src="http://images.stardock.com/images/smiles/joke.gif" border=0 ALIGN="absmiddl
Check your Monitor Power settings. Right click your desktop and click properties to bring up the Display Properties Dialogue. On the Screensaver Tab at the bottom is where you'll find the Power button. Clicking on this will bring up the Power Settings Dialogue. Check to see the timeout settings for Turn Off Monitor, System Standby, and System Hibernate. Unless these are set to "Never" anyone of them could put your system to sleep even with a screensaver off. If they aren't set to never, then thi